Wire meshes are produced on looms as mesh rolls. The metal meshes are stored on rolls. All further processing steps are then performed on the basis of this roll material.
The mesh roll is used as a semi-finished product in applications where it is logistically undesirable to supply the material as strips or cut-to-size pieces due to the many different dimensional requirements.
Depending on the type of weave, mesh rolls can be supplied in widths of up to 11.81 ft (3.6 m) and as custom orders up to 2.,25 ft ( 8 m).
Standard roll lengths range between 98.43 and 164.04 ft (30 and 50 m). Depending on the mesh used, however, lengths of up to 984 ft (300 m) can be supplied.
Mesh rolls can be cleaned up to a width of 6.56 ft (2 m) and thermally treated up to a maximum width of 3.28 ft (1 m).
If meshes are required in smaller widths, partial widths can be produced from a mesh roll and ultimately become mesh strips.
Technical details and services
- Readily available warehouse goods
- Widths up to 11.81 ft (3.6 m)
- Lengths up to 984.25 ft (300 m)
- Cleaning and thermal post-treatment